High Powered Ebonkkarr92 Lightbar

                                                    Pictures only under 10v (12v design)

Modifying a Ebonykarr92 Lightbar into a decent quality scanner is quite easy. The designs are really not changed too much. Really its just drilling holes for the lights and adding Tuono Nero's High Powered Interface

   Please read all instructions before beginning the project.

If you plan on doing this PLEASE follow these steps before following the Eonykarr92 instructions

1. Order a HPI from Tuono Nero. email him here for pricing and availability.

            **NOTE** You will probably have to build your own housing for the HPI for lower costs. This part comes form Italy and its already amazing how inexpensive he can produce it for.

2. Get some Materials

• 3/4" drill bit
• Eight 3/4" Light sockets. Duel filament sockets provide a brighter scanner
• Eight single or duel filament automotive light bulbs (Sylvania 1156(single backup) 1157(duel tail/brake)
• Some metallic spray paint
• All the materials from the Ebonykarr92 Lightbar instructions.

3.

4. Omit steps 9, 13, and 16.

5. In place of step 16. attach wired to the proper ends of T.N.'s HPI. Hook the HPI up to the JC control box. Last, give the HPI a 12v power source and a good ground. ENJOY!

HPI Designed, Built, and sold by Tuono Nero. Contact at blackthunderknight@virgilio.it

Photos

Click for larger image all images only under 10volts!

    Day shot                      Night                 another  night shot       Ultra thick lens